Key Details
- Overall size：5500*1000*1700mm
- Total power：19.4kw
Pre-Milling
Trimming the edge of the panel after cutting
Equipped with a 2.2KW high-power motor, it is composed of two milling tools at the front and rear. The maximum pre-milling height is 40mm (65mm is optional).
Milling the corrugated of the surface of the board makes the edge banding and the board more tightly bonded, and the integrity and aesthetics are better.
Glue Unit
Short time to Reach Operating Temperature. the Tool Free Quick Change System Guarantees Quick Cleaning and Change over Times when Changing the Glue or Colour. the Synchronised, Fine Adjustable Glue Roller Ensures the Right Application Amount Of Glue.
End Cutting Unit
Through the precise linear guide rail movement, the automatic tracking of the profile and the fast cutting structure of the high-frequency high-speed motor are used to trim the protruding edge banding strips at the front end of the plate and the protruding edge banding strips at the rear end of the plate.
Make it flush with the front and back ends of the sheet to ensure that the cut surface is flat and smooth.
Rough & Fine Trimming System
Use The large and small discs to automatically track the high-frequency and high-speed motor structure, trim the edge banding strips bonded on the upper and lower sides of the plate, and remove the excess edge banding material on the upper and lower sides of the processed plate edge banding strips, so that it can be milled into an R-shaped edge.
Buffing Unit
Through the two rotating cloth wheels, the processed panel is cleaned to make the end face of the edge banding more smooth and beautiful, and to keep the polishing wheel worn evenly.
Optional Custom Grooving Devices
- Tailored Engineering: Fully customizable to integrate precise grooving operations directly into the single-pass machining cycle.
- Versatile Slotting Configurations: Engineered to execute multiple specialized profiling geometries across different faces:
- Upper Face (T-Slot): Top-surface channeling for hardware, tracks, or joinery.
- Lower Face (H-Slot): Bottom grooves for cabinet backings and drawer bottoms.
- Side Edge (S-Slot): Lateral edge grooves for tongue-and-groove profiles or hidden fasteners.
- Single-Pass Efficiency: Combines grooving with primary processing to eliminate secondary setups and boost throughput.
Technical Specifications
| Min. Panel Size | ≥100mm | Feed Rate | 15-18-20m/min |
| Min. Panel Width | ≥95mm | Total Power | 19.4kw |
| Panel Thickness | 10-60mm | Working Pressure | 0.65mpa |
| Edge Width | 13-63mm | Size | 5500*1000*1700mm |
| Edge Thickness | 0.4-3.0mm | Weight | 2200kg |
